KADDB has developed a range of world-class land systems ensuring superior performance and comfort to meet the needs and standards of the 21st century Armed Forces.

  • Al-wahsh Military
  • Al-wahsh 105
  • MAP II
  • Desert Iris
  • Al-WASHAQ LIGHT TACTICAL 4x4 ATV
  • Light Utility Vehicle
  • MONJED
  • SCORPION/SCIMITAR
  • TEMSAH
  • Al-DAWSAR
  • MRAP
  • Light Weight Turret

Project Description

Al-Wahesh is a special purpose armored vehicle designed and developed to meet modern warfare mission’s requirements and to operate in all kinds of terrains, it is designed for troop’s transportation along with their tactical gear.

FEATURES

  • KADDB hull design on TATRA chassis .
  • Capable to accommodate up to 10 crewmen.
  • STANAG 4569 KE L1 protection level.
  • Advanced Independent suspension system Capable to accommodate up to 10 crewmen.
  • STANAG 4569 KE L2 protection level.
  • Advanced Independent suspension system.
  • Equipped with surveillance system.

TECHNICAL SPECIFICATIONS

crew 2+8
Maximum Road Speed 110 Km/h
Suspension Independent suspension
Transmission Automatic 6 speeds

* For more information please contact us on (WWW.JLVMLLC.COM)  

Project Description

105mm howitzer gun integrated on Al - Wahesh 4x4 wheeled vehicle, it was designed to suit artillery requirements (shoot and scoot) since it needs minimal efforts to reduce the readiness time.

FEATURES

  • KADDB hull design on TATRA chassis .
  • STANAG 4569 KE L1 protection level.
  • Advanced Independent suspension system.
  • Can be used by artillery corps to support quick and short ranges missions..
  • Can be used in homeland and Urban areas Security.
  • Ability to be used as anti-tank weapon.

TECHNICAL SPECIFICATIONS

crew 4 soldiers
Maximum Road Speed 110 Km/h
Suspension Independent suspension
Transmission Automatic 6 speeds

* For more information please contact us on (WWW.JLVMLLC.COM)  

PRODUCT DESCRIPTION

MAP II is a heavy tracked vehicle platform, converted by KADDB based on the platform of Centurion MBT new hull is designed of built with addition of two main crew doors in the front and back of the vehicle.

It fulfills multi-purpose roles in the support of mechanized armored units based on their needs. It may be used as a personnel carrier, ammunition carrier, ambulance and command of control vehicle.

MAP II provides full protection against medium caliber KE ammunition for the 13 crew members on board.

TECHNICAL SPECIFICATIONS

Crew 2+11
Technical • Complete reutilization of Tariq MBT mechanical & electrical • components to make it as affordable as possible.
• Four top deck crew hatches (500x550mm) in size.
• The front door is 750 mm in width, 1000mm in height.
• The rear crew door width is:450mm at lower end & 850mm in higher end.
Armament 0.5 Cal. MG, can be armed with manned / unmanned medium caliber turret system Light weight Turret.
Ammunition Front Line Ammo. On board, includes:
1. M50 MG Ammo. (12.7x99)
2. M60 MG Ammo. (7.62x51)
3. RPG Launchers: 3 off
Mobility Comparable to Centurion MBT
Survivability Against Medium KE ammo
Payload Ability to carry 13 soldiers with all thier armament and gear

* IN SERVICE

PRODUCT DESCRIPTION

The Desert Iris is an all-terrain all-wheel drive, light weight, utility vehicle, designed, developed, and manufactured by KADDB based on newly designed space frame chassis to meet the Jordan Armed Forces specific requirements for a multi-mission, agile, light patrol vehicle.

FEATURES

  • The design is based on a space frame chassis
  • Low profile fast attack platform
  • Efficient independent suspension
  • Light, compact, and air-transportable
  • Can be armed by a variety of weapons based on the mission profile

SPECIFICATIONS

Total Length (m) 4.1
Total width (m) 1.8
Height (m) 1.7
Gross Vehicle Weight (kg) 1650
Engine 100 hp, 2.8 liter diesel engine
Transmission Manual, 5 speeds
Maximum range (km) 600
Maximum Road Speed (km/hr) 120
Gradient 60%
Side slope 40%
Ground Clearance (m) 0.25
Number of Crew 3+1
Armament 7.62 mm, 12.7 mm MG, 106 mm gun, and ATGMs

* IN SERVICE

PROJECT OVERVIEW

Reliability, Durability and Safety was the major factors considered by King Abdullah II Design and development Bureau KADDB during the design and development of Al-Washaq Light 4x4 Tactical ATV (Utility type) in order to be the best choice on its class.

The vehicle is powered by small diesel engine to give vehicle the high torque generated, where the front and rear independent suspension system provide unbeatable comfort drive at all type of terrain.

The vehicle can be modified to suit accept the following:

  • Quad NASHAB Launcher
  • 106mm recoilless gun
  • Firefighting system

SPECIFICATIONS

Performance
Maximum Speed (km/h) 60
Gradability 60%
Approach Angel 56°
Departure angel 60°
Turning Radius (m) 8.75
Engine
Type 1028cc 20.0KW/ 27.2HP, Liquid-cooled with 3 in line cylinders
Transmission Continuously variable transmission (belt-drive) 3 speeds (high, low and reverse), Selectable shaft 4x4 or 4x2, with front and rear differential control
Fuel Tank Capacity 42L
Suspension 4 Wheels Double Wishbone Independent Suspension
Steering Rack and Pinion
Breaks Dual piston hydraulic disc for front and hydraulic disc for rear brake.
Tires and Rims 6ply 26x9-R14
Chassis & Safety Rigid tubular steel, with 2 passengers roll cage protection, tubular steel pumpers, and lifting rings.
Seats and Harness Suspended seats with head rest and 5 points seat belts.
Weight & Measurements
Length, Width, Height 345cm, 176cm188cm.
Wheel Base 200cm.
Ground Clearance 24cm.
Payload 250kg.
Dry Weight 850kg.
Towing Load 750kg.
Range (off-road and fully loaded) 320km.
Electrical & Instruments 12V, 75Am with 65Am Alternator, Multi-Function Digital Meter, Standard Driving, Tail/Brake lights, and map light, and electrical winch.
Optional 4 passengers roll cage protection, Blackout / IR Lighting, Tire Balls® branded Flat Proof Tech.

* UNDERDEVELOPMENT

PROJECT CONCEPT

Build a multi-purpose light utility vehicle with modular chassis in order to unify Spare parts, keep maintenance as low as possible and reduce vehicles base platforms in JAF.

PROJECT VARIANTS

The variants shall include: Mobile clinic, workshop Vehicle, Command & control, Ammunition Carrier, Fridge, troops carrier and roll cage.

PRODUCT DESCRIPTION

Al-Monjed is a converted recovery vehicle based on the chassis of the decommissioned American battle tank M60A1.

The hydraulically-driven main drum winch has a maximum single line pull of 400 KN (41 tons) at 13 m/min.

The hydraulically-operated crane is capable of lifting up to (6.5 tons) power pack. The hydraulics are self-contained and powered by the power take-off from the main engine as main system or by the installed APU as an auxiliary system, this enables the vehicle to change its own power Pack.

Monjed will tow vehicles of up to 60 tons in weight at speeds of up to 30 km/h.

* IN SERVICE

SCORPION/SCIMITAR

PRODUCT DESCRIPTION

Scorpion/Scimitar Light Tank Upgrade and Modernization KADDB offers a complete modernization and upgrade of these two versatile vehicles which significantly improves their technical and operational performance and guarantees long term sustainability.

TECHNICAL SPECIFICATION

Scorpion Vehicle

  • Engine with 194 hp
  • Dieselization kit
  • TN15 semi-automatic transmission with 7 speeds forward and 7 speeds reverse
  • L23A1 main gun 76 mm caliber
  • 7.62 mm co-axial machine gun

Scimitar Vehicle

  • Engine with 194 hp
  • Dieselization kit
  • TN15 semi-automatic transmission with 7 speeds forward and 7 speeds reverse
  • 2A72 main gun 30 mm caliber
  • 7.62 mm commander’s machine gun
  • 2 ammo feed belts with 350 round capacity

PRODUCT DESCRIPTION

Temsah tracked, heavy, Infantry Combat Vehicle ( ICV ), was designed, developed and manufactured by KADDB in cooperation with Mechanology Design Bureau ( MDB ) of South Africa, CLS Jordan and General Dynamics of the USA based on Centurion chassis. Temsah was designed and fabricated to accommodate surplus of Centurion major components to provide a mission-capable, multi- configured, heavily-protected ICV that can operate alongside the latest generation MBTs, the vehicle could be used also as an APC, tracked ambulance and command post.

TECHNICAL SPECIFICATIONS

  • Length x width x height (m): 8 x 3. 6 x 2.2
  • Crew: 2 + 10
  • Weight: 60 ton
  • Engine: 950 Hp @2400rpm, AVDS-17902-C
  • Speed: 48 km/h
  • Gradient: 60 %
  • Side slope: 45 %
  • Ground clearance: 5.3 m
  • Fuel capacity: 950 liters
  • Operational range: 500 km
  • Transmission: Allison CD-10006A, 2 forward gears and 1 reverse gear.
  • Suspension: hydro pneumatic swing arm suspension system
  • Armament: M60 MG (7.62), ATGMs

Project Description

KADDB designed & built a new variation of the mechanized troops’ platforms by converting an obsolete main battle tank (Tariq MBT) into a heavy infantry combat vehicle utilizing the main chassis & driveline. components (Power pack, final drive, road wheels, rollers, idlers & tracks).

Additional Systems

  • Hydraulic frontal door
  • Electrically operated AC system
  • Heating System for crew compartment
  • Rear Driver Camera (Optional)
  • RPG Protection (Optional)

TECHNICAL SPECIFICATIONS

crew 2+7
Ammunition storage 12.7mm (20 boxes) ,7.62mm ( 40 boxes)
Pay load 10 Tons

PROJECT CONCEPT

To upgrade & enhance the lethality of the MRAP platform (FPI Cougar CAT2) recently joined JAF with the following capabilities:

  1. Integration of the M61 20mm Vulcan system
  2. Mounting a 7.62 mm machine gun on MRAP for light self defense scenarios.
  3. Developing & integrating a networked situation awareness and surveillance system consisted of six thermal cameras, and one central observer system consisted of long range day and night surveillance cameras mounted on electromechanical mast with a continuous 360⁰ pan & tilt system. The surveillance and situation awareness cameras are linked through a network
  4. Integrating thermal camera with gunner screen for Vulcan target acquisition and aiming.

* PROJECT/UNDERDEVELOPMENT

PROJECT CONCEPT

The project aims to design & build a light weight compact turret system with medium caliber cannon as a main weapon to be adaptive for installation on medium wheeled & tracked vehicles currently available in service with JAF or being developed in KADDB for future.

FEATURES

The main turret features & systems include:

Primary armament MK 44 30 / 40 Bushmaster cannon
Secondary armament M240 MG.
Counter Measure Smoke grenade launcher.
Sensor Suite Thermal, day camera, laser range finder, laser pointer
Turret Control system Electric traverse & elevation drive system.
Basket Unmanned Turret
Protection level Skin armour satisfies STANAG I protection level.

Protection upgrades as per customer & weight limitations.

SUGGESTED

Primary armament caliber (mm) 30
Secondary armament caliber (mm) 7.62
Counter Measure (mm) 6 X 66
Elevation -10° - 45°
Traverse 360°
Rate of fire (rounds /min) 30
Total weight Up to 2000 kgs combat weight

Next Page